Technology's Edge September 2010
Flexibility for Shrink Film Capabilities
Editor’s Note: The following is an excerpt from a presentation made at the K 2010 trade show in June by Dr. Daniel Wagner, BASF’s product development–SBC polymers.
Launched onto the market three years ago, shrink films based on Styrolux® HS 70 have become well-established in the European sleeve market. Compared to conventional mixtures of SBC (styrene butadiene block copolymer) and PS (polystyrene), this material stands out for its very high final shrinkage of more than 70 percent.
BASF researchers have now developed even further improved Styrolux grades with an eye towards expanding the product line for this application. They have done so in response to the industry’s desire for stiffer films that allow even larger, more complex objects to be shrink-labeled and the thickness of the sleeve film to be further reduced.
A two-component concept that –differs from Styrolux HS 70 is being implemented for the first time. With Styrolux T (T = toughness) and Styrolux S (S = stiffness), this concept offers two new Styrolux grades from which the desired property profile of the shrink film can be set when the processor blends them, and only once they are put together do they yield the film “Styrolux T/S”. The combination of the two newly developed Styrolux grades now allows manufacturers themselves to adapt the film properties to their specific requirements.
High final shrinkage
Like Styrolux HS 70, Styrolux T/S films are particularly well-suited for the technology of transverse stretching (transverse direction or TD). TD films allow shapes having widely varying radii or unusual designs to be shrink-labeled by sleeve technology.
The new product formulation has succeeded in retaining the well-balanced shrinkage curve of Styrolux HS 70, along with a very high final shrinkage of more than 70 percent at 90°C [194°F]. The uniform, moderate rise of the shrinkage curve permits well-controlled shrink-labeling over a very broad processing range, whereas the high final shrinkage makes it possible to decorate even the most complex of shapes.