packagePRINTING

You will be automatically redirected to packageprinting.com in 20 seconds.
Skip this advertisement.

Advertisement
Open Enrollment | Subscribe to packagePRINTING HERE
Connect
Follow us on
Advertisement
 

Featured Products - February 2013

February 2013

Diecut/Emboss

Varimatrix 105 CS is Heidelberg's entry-level solution for economical diecutting and embossing. It diecuts and embosses papers of 80 gsm and over, board or solid board up to 1,400 gsm, and corrugated board up to 0.16 inches thick. Metallic effects and multistage/relief embossing can be applied efficiently in a single pass using the hot foil module. The Dymatrix 106 Pro CSB is a high-speed system for demanding applications. It features high-quality diecutting with accurate register, and operator-friendliness for fast, precise, trouble-free makeready. Cuts, embosses, and creases paper in excess of 80 gsm, board up to 2,000 gsm, and corrugated board up to 4 millimeters at speeds to 9,000 sheets an hour. www.us.heidelberg.com

Dies for Increased Efficiency

Wilson Manufacturing vacuum insert dies provide a clean method for waste removal from the web. The dies are designed with interchangeable inserts that pick up the slug from the web and extract it through the journal’s center with assistance from a vacuum attachment. Wilson’s spring plunger dies are designed to prevent waste from building up inside die cavities and provide reliable slug ejection from the web. The spring option offers an alternative to traditional air ejection slug removal. www.wilsonmfg.com

Hinged Shaft Collar

The Staff-Lok™ Hinged Shaft Collar by Stafford Manufacturing Corp. is a new lever-actuated, hinged shaft collar for non-rotary applications. It is adjusted and locked in place by just lifting the conformal cam lever; moving it along a shaft, tube, or pipe; and then retightening by hand. Available in 1/2˝ to 4˝ I.D. sizes, the collar is machined from steel and has a smooth bore. www.staffordmfg.com

Pull Rolls

Geared Pull Rolls from PFE are designed to pull scrap web material or trim into scrap bins or recycling containers. These rolls are often used with heavier or more rigid materials that cannot be adequately handled by conventional air conveyance systems. Geared pull rolls are steel construction and precision balanced for the required speeds. www.pferolls.com

 

COMMENTS

Click here to leave a comment...
Comment *
Most Recent Comments: