Martin Splicer Turns Profits for Flexo Printer
August 5, 2011
|
Trebnick Systems, a family-run specialty-products flexographic printer in Springboro, Ohio, recently installed an automatic splicer from Martin Automatic. Purchased last year, the MBSF butt splicer was put into service on a Mark Andy P-7 flexographic press running supported and unsupported film and other products.
Gregg Trebnick reports that the splicer has reduced their material waste in several ways. “Before the Martin, we’d lose at least 300 feet of web at a manual splice getting back into register; the non-stop splice doesn’t affect auto registration at all. In terms of core waste, with the Martin, we’re able to run down to nothing on the core.”
Trebnick also notes that they have started using up partial rolls from inventory, something they could not do efficiently before adding the splicer. “We’re getting higher quality and more production. The Martin butt splicer turns that into dollars for us,” he concludes.
Gregg Trebnick reports that the splicer has reduced their material waste in several ways. “Before the Martin, we’d lose at least 300 feet of web at a manual splice getting back into register; the non-stop splice doesn’t affect auto registration at all. In terms of core waste, with the Martin, we’re able to run down to nothing on the core.”
Trebnick also notes that they have started using up partial rolls from inventory, something they could not do efficiently before adding the splicer. “We’re getting higher quality and more production. The Martin butt splicer turns that into dollars for us,” he concludes.
Companies Mentioned:
 |
|
|
